ベベルサイディング

Characteristics of bevel siding

Western red cedar bevel siding is the most widely used siding type. Re-cutting the wood at a certain angle, one tip is produced by producing thick wood. The manufacturing process gives wood with one side cut. Other aspects are smooth or rough depending on the grade and your preference. Bevel siding is installed horizontally and features an attractive shadow line that varies with the thickness of the siding.

bevel siding with outdoor garden

Grades

For bevel siding, clear (no tuft) or knotty (with knotted) grades are available. Clear (uncrossed) siding provides a high quality appearance and is ideal for high quality applications with a sense of quality. Knotti (with knot) siding has warm and casual charm, ideal for homes, cottages, club houses and places where a rustic appearance is sought.

Finger joint bevel siding

Members of WRCLA also sell clear (non-articulated) and knotty (with knotted) grades of finger joint bevel siding. Exactly bonded joints are substantially invisible and are stronger than the surrounding fibers. Finger joint bevel siding is up to 16 feet long and provides a clean appearance and all-weather performance with the best cedar siding. It is highly appreciated by the builders due to convenient length and speed and ease of installation.

Bevel Siding Grading

Clear bevel siding is rated for the use of a smooth surface, except for the grade only for the use of the rough surface “Rustic”.

Clear (no tangle) VG heart material

Clear VG Heart Cedar Siding

This is the finest bevel siding grade. All clear VG core material grades are cut with vertical wood grain (edge ​​grain), the kiln is dried. There is smoothness of corrosion resistant core material in this wood, there is no growth characteristic affecting appearance and performance. This wood is excellent in dimensional stability and is also excellent for holding finish.

Solid wood or finger joints are available.

North American Rating Standards

NLGA 201a
WCLIB 106-aa
WWPA 21.11

A clear (no tuition)

A Clear Cedar Siding

This is a grade with a superior appearance that includes only slightly more growth characteristics than clear (non-artificial) heartwood. This grain mixed (vertical and horizontal) timber is rated by the state of the surface.

Generally, a certain amount of B grade is included and sold (NLGA 201C / WCLIB 106b / WWPA 21.13)

North American Rating Standards

NLGA 201b / 201c
WCLIB 106-a
WWPA 21.12

General specifications are A & Better including A & Better and a certain amount of B clear (unvoiced).

Rustic

Rustic-Grade-Bevel-Siding

Rustic-grade bevel siding is recommended for use as a sidewall covering that requires a unique charm of a rustic rough appearance. This grade achieves limited characteristics without compromising maintainability.

Solid wood or finger joints are available.

North American Rating Standards

NLGA 201 d
WCLIB N / A
WWPA N / A

Select knotty (with knob) *

Select Knotty Cedar Siding

By the clause and other nature features, the visual characteristics of the Notting (knotted) siding are defined. In select knotty (with knotted) grade, the clause is hard and tight. Rough, or decorative materials, kiln dried or undried, smooth, or sawed texture. Some companies may offer this grade using glue on the back node.

General specifications include select knotty (with knotted) and some high quality knotty (with knot).

North American Rating Standards

NLGA 205 a
WCLIB 111 – e
WWPA N / A

Architect Knotti ®

Architect Knotty Cedar Siding

This product is designed to be used with the re-cut face exposed after trimming according to the interval of the stud wall. There are no open characteristics or defects. This product secures clauses using adhesive on the back side. Architect Knotti ® is particularly suited for factory priming and finishing. Sold by oven drying.

Architect Knotty ® is a registered trademark of WRCLA.

North American Rating Standards

Propriety WRCLA
NLGA – National Wood Association
WCLIB – West Coast Wood Inspection Bureau
WWPA – Western Wood Products Association

Bevel siding size

Western Red Cedar Bevel Siding Size

Nominal size (inches)typegrade
1/2 x 4
1/2 x 6
1/2 x 8
11/16 x 6
11/16 x 8
3/4 x 6
3/4 x 8
3/4 x 10
Plain bevelClear (unvoiced) VG core material
A
Rustic
B
C
original
5/8 x 6
5/8 x 8
11/16 x 6
11/16 x 8
11/16 x 10
3/4 x 6
3/4 x 8
3/4 x 10
7/8 x 8
7/8 x 10
7/8 x 12
Plain bevelSelect Notty
Architect Notti
High Quality Notice
original
3/4 x 6
3/4 x 8
3/4 x 10
5/4 x 8
5/4 x 10
Onane
Bevel
7/8 x 10
7/8 x 12
Horn bevel

* In all grades, not all sizes are being sold.

There are finger joints or
finger joints and something with bonded tips.

Bevel siding area

Bevel siding area table of seed shading

Assume at least 1 inch overlap. Especially wider bevels such as 10 “and 12” can be wider overlap.

Nominal width (inches)Makeup width (inches)Width of exposed surface (inches)Linear feet coefficientSurface dimension
Four3 – 1/22-1 / 24.801.60
65 – 1/24 – 1/22.671.33
87-1 / 26-1 / 21.851.23
Ten9-1 / 28-1 / 21.411.18
1211-1 / 210-1 / 21.141.14

Detailed information

To calculate the siding required for the project, please refer to the siding section siding calculator .

Bevel siding specification

Bevel siding information

When designating bevel siding products, the following information is required.

Required specification informationSample specification
Species:
Western Red Cedar
WRCLA Western Red Cedar
Product pattern and purpose of use:
Siding is used as exterior material and provides both weather protection and architectural style. The builder can choose from a flat bevel, a tweet bevel, or a horn wave bevel.
Plain bevel siding
Size:
Specify the nominal size of the product.
1/2 x 6 in.
Grade: The
entire quality is determined by the grade of the product. Refer to the WRCLA specification document or the rating agency’s rule book for available grades.
Clear (no tangle) VG heart material
Rating agency criteria:
To confirm that the product meets written standards, refer to the agency’s standards.
NLGA para. 201 a
Moisture content:
Specify whether the product is undried or dried in a kiln.
Kiln drying
Exposed side:
We can specify the purpose and help shipping products suitable for project.
Section plane
Quantity: The
required quantity is displayed in units of board feet. For the factor to convert the square foot of the wall part to board feet, refer to the table of WRCLA.
5500 board feet
このホームページに記載されている基準、グレード、その他の情報は、北米のデータに基づいたものです。国別のデータについては、地域の資料を参照いただくか、当協会までお問い合わせください。